UGR86

Helpline no:- 06432 796230 / 8002048021

About UGR86
UGR86 ia a USB GPS Receiver, which can be connected to USB supportive systems. Here are the features of UGR86:-

Connection with any normal USB from any system Plug and Play Real Time Location wherever this device is plugged in USB Robust design with ABS body Compact size (Easy to carry) Please Download File Click here. To download drivers for UGR86 Device which has USB Jack as Shown in the Image in the right panel Click here.

To Check the GPS Cordinate Click here.

For Trouble Shooting Click here.

We suggest the following steps to Install

1. Download File

   Please Download File:- Click here. You will get a download file in zip Format.

2. STEP 2

   Extract the downloaded link and driver is ready to install.
   

3. STEP 3

   Double click on CDM setup, you will get an access request Click ‘Yes’ and proceed.
   

4. STEP 4

   Now, Extract the Windows driver package.
   
     
   
   Click on I accept, next and Finish.
   
   
    
   
   Now, the device is ready to use.

5. How to Connect:-

   Just connect the UGR86 device with the system through USB cable. LED Indications:-
   1. 1. Power (Red):-
         If LED is blinking: Device is powered on.
      2. GPS LED (Amber):-
         If LED flashes: Device has acquired valid GPS signal.
   If LED is OFF:-
   1.  GPS signal is either not available or the system is in process of acquiring the GPS signal.
   
   NOTE:-
   1. Connect the Device with system under open sky.
   2. Device comes with USB cable.
   
   Do’s and Don’ts:- Keep the UGR86 Device away from water.